Wood Edge Banding Machine Edge Bander PVC Sealing Machine

The Wood Edge Banding Machine  contains some cutter and trimmer inside of it. The worker inserts a piece of plywood or any kind of sheet into the edge bander, and it will apply edge banding tape to the edges and trim them nicely to give a perfect finish to the look of your woodwork.

The Wood Edge Banding Machine is very useful for commercial purposes where there are many projects that require a lot of edge banding. Edge bander is a great way to increase productivity and efficiency when working on projects that require an edging or trimming process.

1. Choose appropriate edge banding, wood veneer, plastic and other furniture edge banding materials, and be sure to lay it flat when applying glue. Plastic edge banding must be coated with hot melt glue. It should be noted that the thickness of the edge band is about 0, 3 to 3 mm.

2. Hot-melt adhesive for edge sealing: a medium-low temperature hot-melt adhesive whose melting point is below 120-170.

3. The width of the edge band is between 10 and 45 mm.

Few tips about using edgebander machine

To make the door panels, especially the acrylic door panels, the most basic functions of an edgebanding machine is rough repair, tracking pre-milling, also front and rear cleaning must be added, so that the products have high-quality surface details, to make more high-level products.

Regarding the cleaning before and after, it is actually the glue removal device, the plate which has not been treated with the glue remover, and the plate which has been treated with the glue remover. The results are really different; especially the acrylic door panel and the cabinet edge seal. So don't remove these steps if you have sufficient funds.

The most useless functions of an automatic edge banding machine are: flat scraping and pneumatic adjusting knife. Some people want to have an edgebanding machine without the need of manual adjustment of cutting tools, only by pneumatic tuning knife or automatic knife adjustment, this kind of machine doesn’t exist, you still have to adjust those cutting tools manually for the best performance.

For your reference, here are some essential features of an edgebanding machine for cabinet and door making.

For cabinet making: Gluing, pressing, cutting, aligning, scraping, polishing, cleaning before and after, roughing, refined, pre-milling

For door panel making: glued, pressed, cutting, aligning, scraped, polished, cleaning before and after, roughed, refined, contoured tracking