60W CO2 Laser Engraving Cutting Machine

What is laser engraving?

Laser engraving technology is one of the laser processing technologies. 60W CO2 Laser Engraving Cutting Machine is a marking method that uses a high-energy density laser to locally irradiate the workpiece to vaporize or change the color of the surface material and perform permanent marking. 60W CO2 Laser Engraver 60w Laser Cutter can produce different words, symbols and patterns.

Cutting speed on the impact of the cutting quality, given the laser power density and material, cutting speed in line with an empirical formula, as long as the threshold above, the material cutting speed and laser power density is proportional, that is, increase the power density can improve cutting speed. The power density referred to here is not only related to the laser output power, but also to the beam quality mode. In addition, the characteristics of the beam focusing system, that is, the spot size after focusing on the laser cutting has a great impact.Laser Engraving Machine

The influence of the focus position adjustment on the cutting quality, because the laser power density has a great influence on the cutting speed, the selection of the focal length of the lens is an important problem. After laser beam focusing, the spot size is proportional to the lens focal, after focusing on short focal length lens, the beam has a small size and a high power density, which is advantageous to the cutting of material. But its disadvantage is depth is very short, the adjustment allowance is small, the general comparison is suitable for the high speed cutting thin type material. Because the long focal lens has a wider focal depth, as long as it has sufficient power density, it is more suitable for cutting thick workpiece.60W CO2 Laser Engraving Cutting Machine

The effect of auxiliary gas pressure on cutting quality, in general, the use of auxiliary gas in material cutting, the problem mainly involves the type and pressure of auxiliary gases. Usually, the auxiliary gas and the laser beam coaxial spray, protect the lens from pollution and blow away the bottom of the cutting area slag. For non-metallic materials and some metal materials, the use of compressed air or inert gases, treatment of melting and evaporation materials, while inhibiting the excessive combustion of cutting areas. 60W CO2 Laser Engraving Cutting Machine is mainly used for advertising and art design, to highlight the beauty, generosity and beauty of the enjoyment, is a practical and artistic value!Laser Engraving Machine

This model laser engraver cutter machine is based on various types of customer requirements, combined with our many years of equipment production experience, the use of a variety of advanced technology and special design, to achieve the perfect unity of the two functions of sculpture and cutting.

The co2 laser engraving cutting machine runs fast with simple operation and low cost; Theengraving effect is good, no burr on the cutting edge, no secondary grinding, less cutting waste, carving depth of the best laser engraving machines can be adjusted independently and with high precision.