Advantages Of Plasma Iron Cutting Machine

This plasma iron cutting machine can work on Iron Plate, Aluminum sheet,Galvanized Sheet Stainless,Titanium plates etc. metal sheet and metal pipe can both cutting.

Cleaning up after plasma cutting

After the plasma cutting operation, the power should be cut off in time, and the air and water sources should be turned off. It is necessary to clean the metal residue left on the cutting table to ensure the cleanliness of the cutting table. If there is dirt on the contact surface, it will affect the normal operation of the cutting torch. Because the contact surface of the nozzle and the electrode is charged, the nozzle and the electrode need to be cleaned after use.

Since it was developed in the 1960s, plasma cutting technology has improved the process workers use to cut through metal. Some of the advantages of using a metal cnc plasma cutting machine for your job are:

1. Saving Time and Money

Since hiring a contractor costs money based on the amount of time they spend on the project, a plasma cutter can cut the job's time in half, thus saving money in the long run.

2. Precision

A plasma cutter is controlled by a computer, which means robot-like precision is achieved every time and with no human error.

3.  Versatility

Plasma cutters can cut through a wide range of metals with various thicknesses. And it cuts every time with consistent accuracy and speed.

4. Safety Features

Plasma cutters can be used underwater, which means that workers are exposed to lower heat levels and lower noise levels when using this technique.

5. Fast Delivery

With the time a fabricator is saving by using a plasma cutter, the materials are delivered faster to the construction site and with less chance of delay.

Keep in mind that there is no Garden of Eden, and there are always disadvantages to products and processes. High power consumption is one disadvantage of this cutting process.

Plasma iron cutting machine features：

(1) Welded thick-walled steel structure, after special treatment, no distortion for the whole structure high precision, and longservice life time.

(2) Cutting system use Beijing Starfire system/ Start system/ FLMC-2300A or DSP system; Equipped with automatic height controller (THC controller), which can according to your material planeness, cutting head can automatically stable, and fast adjust.

(3) Taiwan HIWIN linear rail, ensure vertical section, more precision.

(4) Suitable software: Artcam/ Fastcam/ Starfire etc.

(5) FASTCAM programming software based on AutoCAD automatic programming and material system.

(6) FASTCAM is designed for all kinds of NC cutter with cutting software, the software can help the user completing various complex parts drawing, programming, material, using convenient, also bring the obvious economic benefit.

(7) If you cut thick material, according to actual use, we’ll add water tank for you for free, to absorbs a large amount of smoke generated during cutting.

(8) Machine could be customized, whatever specifications, appearance, etc. Any request you’ve, could tell us directly.

Industrial Applications

Plasma cutting with different working gases can cut various metals that are difficult to cut by oxygen cutting, especially for non-ferrous metals (stainless steel, aluminum, copper, titanium, nickel) the cutting effect is better.

The main advantage is that when cutting metals of small thickness, plasma cutting speed is fast, especially in cutting ordinary carbon steel sheet, the speed can be 5-6 times faster than the oxygen cutting method.

The cutting surface is smooth and clean, with little thermal deformation and less heat-affected zone.

Plasma cutting machine is widely used in various industries such as automobile, locomotive, pressure vessel, chemical machinery, nuclear industry, general machinery, engineering machinery, steel structure, ships, etc.