China CNC Woodworking 3d Wood Engraving Machine

This is a 3d wood engraving machine with 2 heads and 2 spindles,the double heads has separate motors,and the double heads can do the same work at the same time or do the opposite work. Therefore, this 3d wood cnc machine  has a higher work efficiency.Now the CNC wood routers for sale at a affordable price.

What kinds of factors should we care about when to choose a 3d wood engraving machine?

1, What do we want to do with the CNC Router machine?

If we are a big woodworking company,  we should focus on the machine working speed, high efficiency, and configuration

If we are a fresh user, we should think about the machine price and easy use.

If we want to work on furniture like a door or cabinet,  we should take care of the max panel size

If we want to use the machine in advertising areas,  the machine simple functions will be the first choice.

2, Different configurations for different use

Working size

The customer should buy a machine according to their maximum working size of the material.  For example, if you are from Asia countries, the max working panel is 1300*2500mm. Then the machine 1325 is ok; If you are from Turkey, Tunisia or other Arab countries, the max panel size is 2100*4100mm, then the 2141 model is ok; If you are from the USA, there are two kinds of panels. One is 4*8, and one is 5*10, so you should check well and then buy.

Spindle

Generally speaking, there are water cooling spindle and air cooling spindle.  If you want to work on soft material at a low cost, then the water smaller kilowatt spindle is a good choice. But if you want to save space and working on hard material like wood, soft metal etc, the big power air-cooling spindle will be a better choice. If your budget is allowed, then the HSD spindle from Italy can be considered due to its reputation. But if the money is not enough, the Chinese spindle is also good enough but a much lower cost.

Controller

If we regard the 3d wood cnc machine for sale as the body, the controller will be the brain in the machine. It is the core position.  If the customer needs fast speed and a more developed CNC Router machine, then the Siemens controller from Germany or Osai from Italy will be the best choice.  But if you don’t have so much money but also want to have a similar advanced machine, then the China Syntec controller or Wehong or NC studio will be good as well.  If you want to easily and lower cost, then the DSP or Mach3 will be recommended.

Guide brand

The famous brand guide usually includes TBI, PMI, HIVIN and so on. And helical racks with such a brand guide will make sure the machine can run very smooth with high precision.

3d wood engraving machine Features

• It is built with 15 outstanding technics, not simple hand-finished work!

• The machine has eight 3D carving operating units driven by one AC servo motor (Delta brand 850 watts). The transmission mode is gear and belt transmission. The clamping of the workpiece is through a headstock and tailstock system. The headstock is fixed at the rear of the machine base; the tailstock is mounted on a mobile carriage to clamp workpieces of different lengths. Another advantage of this design is that when we need to do plane working, we can push the tailstock to the back of the machine, freeing up the space to install the flatbed for flat engraving.

• The flat platform can be installed or removed according to production needs.

• Z-axis Transmission is via coupler, which is more durable and reliable than the timing belt.

• The Z-axis has a dual pneumatic counter-balance cylinder to allow high-speed and accurate Z-axis positioning.

• The 3d wood engraving machineis driven by five sets of servo systems (Delta 850 watts), quiet and precise operation. It also has good acceleration and deceleration performance.

• The machine has 8 sets of 2.2kw water-cooled spindle motors.

• The 4R3022MS8 is equipped with a 4-axis simultaneous CNC control system. The model is WEIHONG 95A-4A; it is a real 4 axis cnc router controller. The system comes with an MPG (manual pulse generator) to facilitate the setup of the workpiece origin point.

• An independent electrical control cabinet suitable for accommodating a computer.

INDUSTRIES 4 Axis CNC router has an swing spindle. It can change the direction automatically during the machining process without stopping. The 4 Axis CNC router has a wide range of applications in furniture, advertising, mold, decoration, construction and other fields and industries. In terms of functions, it can cut, engrave, drill, mill and groove. In regard to materials, 4 Axisrouter can process various wood materials, plastics, stone, soft metals and composites. MATERIAL Wood: natural wood, plywood, soft wood, hard wood, fiberboard, particle board, melamine board, LDF, MDF, chipboard Plastic and rubber: acrylic, ABS, HDPE, PVC, LDPE, UHMW, resin, double-colored board, PP, EVA Stone: granite, marble, slate, basalt, pebbles, ceramic, porcelain, natural and artificial stones Soft metal: aluminum, brass, copper, mild steel Composite: aluminum plastic composite, copper composite, titanium composite, zinc composite