CNC Router Cutting Foam CNC Foam Machine

Our cnc router cutting foam can cut EPS decorative mouldings on exterior wall.The machine can install with multiple wires for cutting 2D models like cornice,roman columns,pillars,base and cap,logos etc.

The cnc foam machine is shipped with Lenovo laptop with Devfoam software installed in the computer.It will be easier for users to operate the machine.

Foam is also a common processing material for CNC foam cutting machines. The main engraving machine for this material is a foam CNC engraving machine. This kind of engraving machine has large processing size, fast processing speed and stable operation. It is an ideal equipment for processing foam. The CNC foam cutting machine is mainly used in the mold industry. Such as paraffin, plaster, lighting molds, ceramic sanitary ware, three-dimensional curved surfaces of large musical instruments, musical instrument molds, household appliances molds, air conditioning molds, automobile molds, automobile interior molds, and automobile instrument molds.

CNC router cutting foam features:

1. The aluminum frame connected by specialized fastenings creates stable performance and precise cutting.

2. Equipped with stepping motor,suits to cut the specially designed figures with requirement of adjustable speeds.the cutting precision can be 0.3-0.5mm.

3. Equipped with 3kw transformer,adjustable power output ranges from 0to 7v under electrical control.

4. 20pecs cutting wire can be set at one time,which exceed sthe regulated  cutting stroke,the machine can stop running automatically.

5. With fuction of cutting stroke protection:when exceeds the regulated cutting stroke,the machine can stop running automatically.

6. With 17"screen and brand computer,the machine realize the disign&cutting,all software for drawings and cutting are english version.it is easy to understand  and operation.cutting software have powerful function,such as automatic memory system while power shut-off,reverse and rotating cutting,mirror symmetry cutting,automatic clearance compensationsystem,which keep accurate and convenient cutting.

7. Rotation platform is optional, achieve to 5 axis cutting. 

Other Maintenance Matters Needing Attention

Every time the nut on the spindle is changed, the dust in the inner thread should be cleaned to avoid the vibration of the knife during high-speed rotation, which will cause the sawtooth phenomenon in the cutting. When loading the knife, first manually make a few turns. Use a wrench to tighten after ensuring that the wire positions match. At the same time, avoid disassembly after tightening due to wire misalignment.

The cutting machine with a drill pack must use the manufacturer’s designated special grease brand (German Klüber ISOFLE_TOPASL 32). The drill pack is filled with grease every 20 days of work (two shots with a standard oil gun each time ). When the temperature in the workshop is below zero in winter, the drill row must be idling for 3 minutes before starting, and it is strictly forbidden to use other brands of butter for filling. Do not add too much grease for maintenance of the drill row. You must use the special grease provided by the original manufacturer, otherwise, it will cause the drill bag motor to burn out, and the damage to the drill bag caused by incorrect use or extra addition will not be guaranteed. Then contact our company’s after-sales department to buy regular lubricating grease.

Before turning on the vacuum pump in winter, turn on the fan to see if it can rotate. If it can’t turn on, do not turn on the pump first, first, melt the ice on the water tank and pump body, and then try running. In winter, the water in the water tank must be discharged before getting off work every day. There are 3 screws on the lower side of the pump body to loosen, and the pump body is tilted 45 degrees to discharge the water. Or add antifreeze to avoid freezing the next day. Special attention: When the temperature in the workshop is below 0 degrees, the vacuum pump must be maintained to drain water or add antifreeze. The requirements must be implemented, otherwise, the vacuum pump will freeze, which will cause the vacuum pump motor to burn out and affect the vacuum adsorption capacity.

All equipment (including vacuum cleaners and vacuum pumps) must be connected to the ground wire and ensure effective grounding.

It is recommended to install a voltage stabilizer in the production workshop to prevent electrical components from being damaged due to unstable voltage and affecting production.

Multi wires heavy duty CNC foam cutting machine 

hot wires

The CNC EPS cutting machine is oscillating hot wire machine which can take up to 20 pcs of hot wires,it mean it can cut 20 pcs of foam mouldings at one time.it is with steel structure and industrial stepper motor and ball screw,it is durable in working and it is designed for mass capacity application for foam cutting factories.

The cutting wires are Nichrome( NiCr) cutting wires with diameter 0.4mm,0.6mm.it is inexpensive and suitable for everyday uses.The hot wires will reach the temperature of a few hundred Celcius degrees during cutting.We usually ship machine with one kg of hot wires