Maintenance Of Fiber Laser Cutting Machine For Metal

Fiber laser cutting machine for metal sheet cut, using open design and single table, it is enter type of laser for metal cutting.  Easy to loading metal sheet and pick the finished metal pieces from any side, Integrated operator valid 270 degree move, easy to operate and save more space.

The commonly used size of fiber laser cutting machine for metal is 1500*3000 (5×10ft). The size of the large-area worktable requires a more robust body, which can ensure that the machine will not be deformed for long-term use.  metal laser cutting machine adopts a heavy-duty frame with a rectangular pipe wall thickness of 10mm, which increases the stability of the guide rail so as to effectively avoid the deformation of the bed. Lifetime is up to 25 years. It adopts aviation aluminum gantry, which is light in weight, high strength. Molded and framed by integral steel mold and die-casting technology, light crossbeam enables equipment a high operation speed, improving processing efficiency and processing quality.

The servo motor is the guarantee for the fast and stable operation of the fiber laser cutting machine. IGOLDENCNC fiber laser cutting machine adopts Taiwan Delta servo motor, which has faster speed and signal feedback, and can run smoothly at ultra-low speed. The laser power of the fiber laser cutting machine can be selected from 1000W, 1500W, and 2000W. The high-power fiber laser machine is especially suitable for high-speed and high-precision metal cutting. The cutting slot is very slim, which can reach up to 0.05mm.

So how should we do the maintenance of the laser cutting head? This should be divided into two parts: daily maintenance and regular maintenance.

Daily maintenance

1. Check whether the position of the cutting head is accurate every time before starting the machine to ensure the accuracy of the starting point, height and other data of the laser cutting head, and avoid collisions and other accidents during the work process.

2. Check whether the amount of cutting gas is sufficient. If air is used, check whether the pressure of the air pump is sufficient.

3. Check whether the water volume and water temperature of the cooler meet the set requirements of the equipment, and the water volume should be sufficient during work to avoid damage to the laser cutting head due to insufficient cooling water.

4. Check the oil circuit, gas circuit, water circuit, pipelines and joints of pneumatic components for leaks, and whether the parts are in good condition.

Parameter Configuration

Regular maintenance

We should make a weekly inspection plan when we use it, or customize the inspection plan according to the actual frequency of the machine.

1. Regularly check the loss of the cutting nozzle of the cutting head. If the loss is serious, replace it in time

2. Check the sharpness of the lens at each part of the cutting head and clean it reasonably

3. Check the cleanliness and unobstructed conditions of all pipes and joints-to ensure that there are no impurities and no blockages

4. Check whether the fixed parts of the cutting head are loose

Fiber laser cutting machine for metal Applicable :

High-precision instruments, machinery, electrical appliances, metal crates.

Cabinets, electrical shells, sheet metal processing, auto parts, decoration.

Lighting,bathroom accessories,kitchenware,stainless steel (metal) decoration,mobile communication products, electronic components, etc.