New 500W Laser Cutting Machines For Stainless Steel

The stable and normal operation of the laser cutting machines for stainless steel is inseparable from the usual correct operation and daily maintenance.Therefore, in order to ensure the normal operation of the machine, we need to carefully maintain the stainless laser cutting machine. Next, IGOLDENCNC will introduce how to maintain the stainless laser cutting machine.

1. Water replacement and water tank cleaning

Because the function of the water cooler is to reduce the temperature of the laser generator and prevent the laser from being burned out.So we have to frequently replace the cooling water and clean the water tank.

2. Cleaning of the fan

The main function of the fan is to remove the smoke from the cutting, to ensure that the workshop air is clean, and to prevent the smoke from contaminating the lens. Therefore, in order not to affect the laser stainless steel cutter machines in normal use, we need to clean up the Fan.

The long-term use of the fan will accumulate a lot of solid dust in the fan, make the fan generate a lot of noise, and it is not conducive to exhaust and deodorization. When the fan suction is insufficient and the smoke exhaust is not smooth, first turn off the power, remove the air inlet and outlet pipes on the fan, remove the dust inside, then turn the fan upside down, and pull the fan blades inside until it is clean, and then install the fan.

3. Cleaning the guide rail

Guide rail and linear shaft are one of the core components of the laser cutting machines for stainless steel, and its function is to play a guiding and supporting role. In order to ensure the high processing accuracy of the stainless laser cutting machine, the guide rails and straight lines are required to have high guiding accuracy and good movement stability.

During the operation of the laser cutting machines, due to the large amount of corrosive dust and smoke generated during the processing of the processed parts, these smoke and dust will be deposited on the surface of the guide rail and linear shaft for a long time, which has a great impact on the processing accuracy of the equipment, and will Corrosion points are formed on the surface of the linear axis of the guide rail, which shortens the service life of the laser stainless steel cutter.

In order to make the stainless laser cutting machine work normally and stably and ensure the processing quality of the products, the daily maintenance of the guide rail and linear axis must be done carefully. (It is recommended to clean once every half month and shut down operation) (It is recommended to clean before work every day, and the equipment must be shut down) (It is recommended to clean the water tank and replace the circulating water once a week).

4. Fastening of screws and couplings

After the motion system has been working for a period of time, the screws and couplings at the motion connection will loosen, which will affect the smoothness of the mechanical motion. Therefore, during the operation of the stainless steel cutter machine, observe whether there are abnormal noises or abnormal phenomena in the transmission components, and find problems in time. Sturdy and maintained. At the same time, the machine should use tools to tighten the screws one by one after a period of time. The first firming should be about one month after the stainless steel cutter machines is used.

5. Inspection of optical path

The optical path system of the stainless laser cutting machine is completed by the reflection of the mirror and the focusing of the focusing mirror. In the optical path, the focusing mirror does not have an offset problem, but the three mirrors are fixed by the mechanical part, and the possibility of offset is relatively high. Large, although there will be no deviation under normal circumstances, it is recommended that the user check whether the optical path is normal before each work.

6.Daily maintenance of laser stainless steel cutting machines

1).Inspection of laser working gas and cutting gas: check the gas cylinder of laser working gas

2).Check that the cooling water pressure is maintained between 3.5 and 5 Bar.

3).Check the temperature of the cooling water, the temperature of the water required by the selected laser is better.

4).Check the oil level in the laser vacuum pump. If it is not enough, add it.

Features of laser cutting machines for stainless steel:

Stable running

Adopting gantry structure with synchronous bilateral gear and rack drive, and high-strength aluminum beams enhance its stability.

High technology

Full application of laser technology, mechanical technology, numerical control technology and other advanced technology.

High efficiency

High-speed digital motion control by Germany technology system, especially for high-speed, high-precision laser cutting.

Integrated design

laser cutting machines for stainless steelis dual-drive mobile gantry structure with linear guide and gear rack drive system. A 10% reduction of the volume of space, easier and cheaper for transportation.

Low energy consumption

Photoelectric conversion rate is up to 25-30% which can save energy and power. Electric power consumption is only about 20%-30% of the traditional Co2 laser cutting machine.

Low maintenance cost

Fiber laser cutting machines doesn’t need reflect lens, saving much maintenance cost. The key components lifespan can reach 100,000 hours with stable performance.

The laser cutting control system of an economical laser cutting control system.

Widely used in the field of metal and nonmetal laser cutting. Because of its outstanding performance in the field of fiber laser cutting, by the vast number of high-end users.

The cutting head LightCutter 2.0 is the perfect solution for efficient and cost-effective laser cutting. The new generation of our Light Cutter family is designed for cutting applications in the medium power range up to 4 kW and is characterized by a high cutting quality for all metals - especially mild steel, stainless steel and aluminum.