High Quality China Stone CNC Router Machine

This stone cnc router is widely used for carving on natural stone, marble, granite, bluestone, gritstone, soapstone and etc. Also can work on any kinds of wood, plastic, acrylic and non-ferrous metals like aluminum, brass and etc. Different size granite marble stone carving cnc routers can be OEM as per clients' needs.

Features of the stone cnc router:

1. The Stone CNC Router is with fast speed, high precision, strong stability, low noise and long service life.

2, The working table of the marble engraving machine is a T-shaped steel bracket, using a full welding process and vibration aging treatment. Thus it can ensure the stable performance when the machine running at high speed, and continuous knife, keep the production processing surface is highly smooth.

3,  The stone engraving machine use high-power horizontal torque spindle, with large bearings. and with high speed, a large number of chips, and the motor is not easy to damage.

stone cnc router applicable:

Applicable industry: widely used in large stone panel engraving industry, craft processing and building material industry.

Applicable material: stone, artificial marble, glass, brass, aluminum etc. Soft metal plate

Stone Cutting Machine Operation Rules：

1. Wear work clothes and goggles. The female worker's long hair curls her hair up and puts on a work cap.

2. The power knife switch, the tightness of the saw blade, the saw blade shield or the safety baffle should be inspected in detail. The operating platform must be stable, and there should be sufficient lighting for night operations.

3. Turn on the main switch, try a few revolutions with no load, and start after the safety is confirmed.

in working

1. Operation with gloves is strictly prohibited. If dust is caused during operation, wear a mask or face mask.

2. Don't try to cut small pieces that are not clamped.

3. This cutting machine only allows cutting profiles.

4. It is not allowed to perform powerful cutting saw operation. Before cutting, make the motor reach full speed.

5. No one is allowed to stand behind the saw. Either hand or raise your arm.

6. Do not operate when the shield is not in place, and do not put your hand within 15 cm from the saw blade.

7. Before repairing or replacing parts, you must cut off the power and wait for the saw blade to stop completely.

8. If abnormal sound is found, the inspection should be stopped immediately.

After work

1. Turn off the main power

2. Clean and tidy up the workbench and site

Technical Data