Maintenance Notes For Plasma Router CNC

Plasma router cnc is a kind of CNC metal cutting machine which controls the movement of precision machinery through computer and servo system. It takes Hypertherm plasma cutter which generates high-temperature plasma arc to melt (and evaporate) the metal at the workpiece incision, and uses the momentum of high-speed plasma to eliminate the molten metal to form the incision, so as to achieve fast and accurate cutting of any graphics.

The maintenance of CNC systems is generally clearly defined in the system optimization manual. But the following aspects should be paid attention to in actual operation.

1. The heat dissipation and ventilation system of the CNC cabinet and electrical cabinet should ensure normal operation.

Every day should check whether the cooling fan of each cabinet is working properly and whether the air duct filter is blocked, so as not to cause the temperature in the cabinet to be too high so that the system cannot work reliably.

2. The electrical cabinet should be kept dry and clean.

Open the control cabinet door as little as possible to prevent dust, oil mist, and metal powder in the air of the workshop from falling on the electronic components or printed circuit boards and causing short circuits. For the CNC system that has not been used for a long time, the system should be frequently powered on, and the system should be run empty when the machine tool is locked.

3. The system backup battery should be replaced regularly.

The system parameters and user processing programs are saved by static registers with power-off protection. The contents of the memory after the system is turned on are maintained by the backup battery. Therefore, it is extremely important to check the working status of the battery and replace the battery in time.

4. The brushes of the DC servo motor should be regularly checked and replaced.

Excessive wear of DC motor brushes will affect the performance of the motor and even cause damage to the motor. It is generally checked every three months or half a year, and the surface of the brush is cleaned with industrial alcohol.

5. The paper tape reader should be maintained regularly.

STARFIRE with THC Control System

Automated CNC Plasma Cutting is a mainstream tool in any fabrication operation where flat plate profiling is performed. Over the past decade, Automated plasma cutting has become more precise, more repeatable, more reliable and more versatile than ever before.  high strength and high precision build, and unmatched ease of use. A novice operator can auto-align plate and cut shapes in 15 minutes!

Plasma router cnc features :

1. Our machine adopt the iron cast heavy duty body frame, can ensure the machine whole working precision ,The cutting incision is thin and tidily and can avoid the second processing.

2. Water tank working table can be effectively absorb a large amount of smoke generated during the work.

3. Shanghai FL control system with the water mist function, it can ensure the cutting effect , ensure no black color on the cutting edge. especially for the stainless steel and aluminum 

4. All of our metal plasma cutting machine with the bigger up-down device system .

CNC plasma cutting machines are computer-run systems that have the ability to move a high-definition plasma torch in various directions by using the numerical coding that has been programmed into the computer. The high-definition plasma cutter itself operates by forcing a gas or compressed air through a nozzle at high speeds. An electric arc is then introduced to the gas, creating plasma which is able to cut through metal.