With the rise of custom furniture industry, the CNC router machine with auto tool change function began to enter the furniture factory, replacing the original precision table saw into the mainstream drilling, cutting equipment in the furniture factory, greatly reduced the production of custom furniture. Getting started, after a period of development, the ATC CNC router machine and six-sided CNC drilling machine has become a combination plan for custom furniture production, and some high-end custom furniture manufacturers have started using professional automatic side holes.

CNC engraving machine typeIf you want to engraving, engrave patterns, engraving letters, etc., maybe you will find a hand-held sculpture or a store with CNC engraving machine, but what kind of CNC can better meet your demand?If you are a manufacturer and want to extend your business to engraving or

When the furniture factory is producing cabinet, flat door or moulding door, there is often a need for opening, slotting, three-in-one, wooden pin hole, invisible piece hole, hinge hole, etc., different specifications and standard processing processes, the ordinary CNC woodworking machine or multi-process CNC machine cannot meet the demand for processing, especially during the moulding door panel, the office furniture production process, the shape is high. A panel may need to use 6-8 tools to process, in this case the automatic tool change machine is the best choice of furniture production enterprises.

The servo motor is used as an actuator in the control system to convert the received electrical signal to the angular displacement or angular velocity output on the motor shaft. The rotor in the servo motor is a permanent magnet. U / V / W three-phase power controlled by the driver forms an electromagnetic field. At the same time, the motor's encoder delivers the signal to the drive, and the driver compares the target with the feedback value. The comparison value is adjusted to adjust the rotation angle of the rotor.

When you think of CNC working, you usually think of plastic and wood. However, CNC cutting machine can also cut aluminum (a weaker metal) well. At the same time, you need to pay attention to some things. Not surprisingly, cutting aluminum has its complexity (unlike wood and plastic). The first thing to know is that aluminum is a "sticky" metal and it wants to stick to your cutting tools. As a result, removing the chip will be a little tricky (more on this later).

CNC laser cutter is already a general-purpose mechanical cutting tool. I believe that many users will not use it after understanding the operating steps of the laser cutting machine, and some people will only use it according to their own habits. This will inevitably have a negative impact on the use of CNC laser cutter.

Using stone cutting machine for the following reasons: 1. Can cut various materials. 2. Get a high-quality finish every time you cut, thereby increasing productivity. 3. Environmental protection means you don't have to spend money. 5. Save raw materials. 6. Get a prototype quickly