Stainless Steel Laser Cutter Fiber Laser Machine Anti-Freezing Measures

Stainless steel laser cutter has been one of the most “disruptive” technologies introduced to the metalworking market since CO2 lasers were first introduced for cutting in the 1980s. Fiber laser technology is considered a disruptive and “revolutionary” change because it has impacted the entire status quo in sheet metal fabrication. And the opportunities are easy to realize.

Can stainless steel laser?

The areas of application for stainless steel laser cutting and laser engraving are quite diverse. For example, the process is used when the finest geometries of high precision and quality have to be cut. And the method is also extremely popular for industrial marking or creative design due to its numerous advantages.

stainless steel laser cutter anti-freezing measures:

1. In winter, the weather is cold and the temperature is low. The water used to cool the cutting head in the water tank of the chiller will freeze without antifreeze measures. The temperature of the workshop where the cutting fiber laser machine works should be kept above zero. If the environment above zero cannot be guaranteed, The water circulation function of the cooling water tank of the equipment can also be activated. The water will not freeze in the flowing state, and the water circulation is more energy-efficient than raising the temperature.

2. Do not add antifreeze to the cooling water to save costs. The chemical components in the antifreeze will react with the metal in the laser and cause corrosion of the parts.

3. Due to the different climates in the northern and southern hemispheres, some areas are humid and rainy in winter, and the air environment is humid. The humidity in the fiber laser machine case is more expensive. After the main power of the laser is turned on and before the laser emits light, turn on the attached control cabinet The air conditioner runs for 30 minutes to prevent the components in the cabinet from malfunctioning due to moisture.

4. If the fiber laser machine ss sheet machine is not used for a long time in winter, if there are long-term holidays in winter, the water in the water tank will deteriorate due to long-term non-replacement, or freeze due to low temperature, which will damage the metal laser cutting machine parts. In order to ensure the laser cutting sheet metal machine Normal operation. Before the holiday, all the water in the water tank should be emptied, one end of the small water pipe should be removed, and all the water should be blown out with air. When turning it on again, first check whether the machine is freezing and whether the room temperature is above 0 degrees.

Advantages of stainless steel laser cutter:

1.Full enclosed protective cover,Guaranteeing the separation of operator and machine,Dust proof Environmental

2. Carbon steel plate welding, structural stability, high temperature annealing

3. Five-axis center finishing, high strength and good rigidity

4. Integral cast aluminum beam, light weight, corrosion resistance, oxidation resistance, low density

5. Automatic focus adjustment, no manual

stainless steel laser cutter has the following characteristics:

（1) Use cutting-edae fiber lasers. with extremely high photoelectric conversion efficiency stable performance. and service life of key componentsJp to 100.000 hours

（2) The laser generation process does not require gas air-assisted cuttina ontical fiber transmission and no need to adiust the ontical path:

（3) The laser is transmitted by optical fiber, no reflective lens is required. which can save a lot of maintenance costs:

(4) Compared with other medium laser equipment, fiber laser cutting machine has a smaller focus spot and higher working efficiency. Getter processing quality;

(5) Simple structure and small area:(6) Capable of handling any harsh working environment, that is, it has high resistance to dust, vibration, impact, humidity and temperature