Views:8 Author:Site Editor Publish Time: 2021-07-21 Origin:Site
This woodworking router is equipped with a fourth rotation axis on the basis of the basic router. In addition to engraving and cutting wood on a flat surface, it can also be used for engraving and cutting round materials. Therefore, this machine can process flat materials and round materials at the same time. This wood cutting CNC machine adopts a 6.0KW main shaft and Z-axis heightened to 500mm. The powerful YASKAWA AC servo motor is suitable for the third and fourth rotation axis.
A CNC wood router can be various in types. We will briefly discuss them in the kind of CNC router section. In this part, we will have a glance at the working principle of the 3-axis CNC wood router machine.
The cutting tool has a motor that can move on the z-axis. It means the cutting tool can go up and down. On the other side, The cutting tool and the engine situated inside a box that can move only on Y-axis. At last, the total parts mentioned above can run along the X-axis. Consequently, we call this machine as a three-axis router.
Following the codes from the operating software, these three motors run accordingly. But before it starts to the operation, it goes back to the origin and begins from there.
Reliable Controller system: German SIEMENS Controller / Syntec Controller / DSP Controller / Mach3 Controls System
AC Servo Motors for 3 Axis, Duo AC Servo drivers, and motors for Y-axis ( X, Y, Z )
Heavy-duty wood CNC machine structure, rigid dual Y support and thicken gantry
German helical rack & pinion
TAIWAN PMI Linear Guide and ball screw
3.0KW / 6KW / 9KW Spindle
Vacuum table in zones
German Technology Vacuum pumps
3.0KW Dust collectors
Auto lubrication system
Auto Tool Sensors
Safety laser curtain
CNC Wood Router applications:
Building Industry (General Woodworking, Kitchen Cabinet & Door, Facades & Curtainwall, Column & Balustrade)
Sign& Advertising (Signage Indoor & Outdoor, Engraving& Bas-Relief, 3D Letters, Funeral)
Relief sculpture and 3D engraving and cylindrical project.
Plastics & Composites (ACP, ACM and solid surface material, etc)
Non-ferrous metals & Marine
|XYZ working area||1300*2500*200mm|
|XYZ travel positioning accuracy||±0.05mm|
|Drive system X-Y axis||Rack actuation|
|Drive system Z axis||Ball screw|
|Max working speed||20m/min|
|Work mode||Step(optional servo)|
|Working voltage||AC220V / 380V-50HZ|
|Command language||G code|
|Operating system||NC Studio / DSP|
|Software environment||Wentai type3 artcam|
|Net weight||1200 kg|
|Gross weight||1650 kg|