Wood CNC Router Engraving Machine Failure And Treatment Methods

Wood cnc router engraving machine kit is a type of flatbed wood CNC machine for beginners with 4x8 combo vacuum and T-slot table top. Let us review and start making an offer at the lowest price for affordable 4x8 wood CNC router kits which make as standard.

Today IGOLDENCNC Laser shares 10 common faults of woodworking engraving machines and their solutions.

One: The spindle motor suddenly stops or rotates slowly during the working process of the woodworking engraving machine

1. If the working voltage is unstable or overloaded, just add a voltage stabilizer.

2. Check whether the middle line is connected well and whether the end of the line is unsoldered.

Two: wood cnc router engraving machine cannot engrave at the origin

1. Whether the layout size of the file matches the machine.

2. Check whether there is an offset (OFFSET) and whether the layout setting is correct.

Three: The wood cnc router engraving machine makes an abnormal sound or always breaks the limit switch when it is reset.

1. The limit switch cannot be touched, just correct it.

2. The drive line is not in good contact, just fix the drive line.

3. The limit switch wire is not connected properly, just connect the wire properly.

4. The limit switch is damaged, just replace it.

Four: When the woodworking engraving machine sets the origin, it sometimes shifts forward or shifts to the right and the offset distance is uncertain.

1. The limit switch is out of order. The limit switch has been closed and then bounced back when the system returns to the system origin. Just change the limit switch.

2. The drive line is loose. Try to fix it tightly.

Five: The woodworking engraving machine does not move or moves abnormally in one or three axes

1. The control card is loose or faulty.

2. The drive of the corresponding axis is faulty.

3. The corresponding axis stepper motor is faulty.

4. The corresponding coupling is broken or loose.

5. The corresponding screw rod is broken or the screw nut is faulty.

6. The sliding speed of the corresponding shaft fails.

7. The subdivision number, current, and setting of the driver are different from those set in the software.

Six: out of control of the z-axis of the woodworking engraving machine

1. The control card is loose or faulty.

2. Electrostatic interference.

3. The z-axis motor cable is faulty.

4. The file path is wrong.

5. Inverter interference.

6. There is a problem or virus in the computer system.

7. The power of the Z-axis motor is not enough, and the coupling is loose.

8. The current of the Z-axis driver is too small, or the signal line is connected incorrectly.

9. Operation error.

Seven: Woodworking engraving machine has different engraving depths

1. The control card is loose or faulty.

2. Step closer to the motor failure.

3. Drive failure or current subdivision is inconsistent with the software setting.

4. The z-axis motor cable is faulty.

5. The spindle motor is faulty.

6. Inverter interference or incorrect data settings.

7. Electrostatic interference.

8. Computer viruses or system problems.

9. The working platform is uneven.

Eight: The woodworking engraving machine cannot return to the machine origin normally

1. The opposite direction

2. The control card is faulty or loose

3. Limit switch or data line failure

4. Drive failure

5. Step-by-step motor failure

Nine: The wood cnc router engraving machine has an error

1. The control card is loose or faulty.

2. The drive is faulty.

3. The stepper motor is faulty.

4. Electrostatic interference.

5. The motor wire is faulty.

6. The data line is faulty.

7. The path is wrong.

8. The coupling is broken or loose.

9. The processing speed is too fast (the system parameter curve acceleration is too large).

10. Computer system problems or viruses.

Ten: Random engraving on woodworking engraving machine

1. The control card is faulty.

2. Inverter interference.

3. The file path is wrong.

4. Electrostatic interference.

5. There is a problem with the software setting.

6. The driver is faulty or the current subdivision setting is wrong.

Features of wood cnc router engraving machine:

This item is very suitable for furniture bulk production, multi heads can work at the same time, also can work alone, many times increasing efficiency.

Table movement, long time use no distortion, the more precise positioning accuracy.

Advanced 4 axis Ncstudio control system, very stable and convenient to use.

Well compatibility in software: all kind of 3D carving softwares.

We can make Multi heads machine with any working size according to customers' specific requirements.

Except furniture legs, it also can process 3d sculptures and complex artworks, can easily engrave 360 degree Human body, Buddhist statue, sculptures and other art works.

Wood cnc router engraving machine Application

1.Woodworking Industry: MDF, wood, acrylic, PVC, double-color board, brass, aluminum, marble, crystal.

2. Advertising industry: advertising billboard, sign making, acrylic cutting, graphic mold forming and processing of many kinds of advertising terms.

3. Architectural model industry: metal models of copper, aluminum, iron etc, and non-metal models, such as artificial marble, grave, plastic board, PVC, board etc.

4. Other industry: image engraving, embossing, craft and gift industryy.