Common Problems Of Wood Automatic Edge Banding Machine

As a cost-effective fully automatic edge banding machine, it can complete gluing, banding, edge cutting, rough trimming, fine trimming, tracking, scraping and polishing functions automatically. It is widely used for banding various wooden boards, such as density boards, fiber boards, particle boards, solid wood panels, etc.

Common problems and solutions of automatic edge banding machines

First of all, excessive welding: too much energy input to work

Method: 1. Reduce the air pressure value. 2. Reduce welding time. 3. Slow down the descending speed of the upper die.

Secondly, insufficient splicing: too little input energy

Methods: 1. Increase the air pressure value 2. Lengthen the splicing time 3. Use a higher power model.

Finally,the welding is not uniform: the first consideration is the distortion and deformation of the workpiece, the contact surface of the welding head, the base, and the workpiece is not flat, the support of the base is not firm or the workpiece error is too large.

Method: 1. Check whether the size of the workpiece is different, and check whether the operating conditions cause the deformation of the workpiece.2.The power point is redesigned to make the height uniform, adjust the horizontal screw, check whether the operating conditions are correct, and check the shape and size of the workpiece. 3. Where necessary, improve the support points, and the base needs to be redesigned and replaced with a hard base. 4. Tighten the tolerance of the workpiece, and re-modify the size of the work piece, and check the operating conditions (pressure, delay time, welding time, curing time, etc.)

Advantages of automatic edge banding machine:

High productivity

9 m/min panel feed speed with track movement for an increased productivity. Monitoring of the panel position by encoder for a total work cycle control.

Simple and intuitive

Error-free machining is ensured by the control panel positioned on the front of the machine, that allows an easy selection of all the main functions, among them, the operating units switching on and off. The PLC guides the operator during maintenance, cleaning, diagnostic operations, etc.

Impeccable finish

New rounding unit with rigid structure for a unique quality of work in its segment. The particularly affordable price distinguishes it as the most competitive edge bander with round on the market!

Brillant idea

The end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel without the need of the operator to have to finish by hand at a later stage: brillant idea to a finished product of high quality.

1.Full-automatic edge banding machine function include glue,head together,rough repair,refine,Scraping edgeand polishing.

2.Have good shape,reasonable layout,has sound arrester,dust collector and overload protection.

3.The main parts of the machine adopt steel plate by laser cutting,one time welded together,the body is firm and undeformed.

4.Can increase or decrease component structure according to actual demand.

Functions of automatic edge banding machine:

Gluing---Glue mechanism adopts a special structure to gelatinize the plated and coat materials uniformly, which ensures a more solid conglutination.

End trimming---End trimming mechanism through a precise guide track movement, adopts automatic tracking and high frequency motor fast cutting structure to ensure the cutting surface smoothly.

Rough and Fine Trimming---Rough/Fine trimming mechanism is used for repairing the excess edge materials, adopting automatic tracking and high frequency motor fast cutting structure to ensure the trimming plates smoothly.

Conner trimming---Profiling unit is to make board end more smooth and aesthetic.

Scraping---Scraping unit works for a perfect finishing of the applied edge.

Buffing--- Buffing device adopt the board processed by cotton polishing wheel, by end-polishing to make a more smooth surface.