How To Maintain Wood CNC Router Engraving Machine

If woodworking engraving machine maintenance work done well, can very good running condition that assures ambry door engraving machine, engraving machine running stability is cupboard door, processing speed and processing accuracy, to be able to get good protection.

but if the wood cnc router engraving machine cloth to do maintenance and maintenance, so the early may fix it several times, but later the problem will be more and more, repaired here and there is a problem, this is because the woodworking engraving machine door one or several parts of the loss is more serious, will affect the normal work of the other parts, less maintenance, forced to wear and tear parts will be, the more the running of the whole machine is more problematic. How do cabinet door engraving machine maintenance?

1. The computer

Regular virus detection, but can not open the attention of serious anti-virus work interference.

Clean the dust of the cabinet regularly, and pay attention to the heat dissipation of the cabinet.

Organize your hard drive regularly to optimize your computer system.

Computer anomalies may also cause many problems, especially for connecting woodworking engraving machine , we summarized the we found technology in the process of woodworking engraving machine maintenance, computer abnormal also give us repair caused a lot of unnecessary trouble, also delayed the customer's business, ask the client pay attention to several aspects of computer maintenance.

2. Clean up

Regular cleaning of industrial control boxes, dust on circuit boards is the biggest killer.

Regular cleaning of screw rods to prevent the presence of foreign matter on rod screws, screw devices are important for determining wood routers

Accuracy and screws also play an important role in the transmission process.

When the work is done clear the table in time, it provides a convenient nearby wood engraving machine.

Clear the rails and the adjacent material shavings of the guide rails to prevent the card from causing interference from debris in the machine.

3. The oil

After adding the oil, move back and forth slowly to ensure the lubricant can be applied evenly on the guide rail and the screw.

The aircraft should not be refueled regularly for a long time to ensure the flexibility of the transmission system.

First of all, clean the guide rail with screws, can be used in the cloth (not depilate) to clean out the oil of the guide and screw and material debris. At low temperatures, it is best to add antifreeze and oil to railway and screw motor oils.

Fuel cycle twice a month, that is, every two weeks, once oil.

Temperature of 4.

When the machine is not in use, if the indoor temperature is low, it is best to pour water into the water tank to prevent the tank and water pipe from cracking.

The ambient temperature in the operating room, wood engraving machine, is best at room temperature, at least staff won't be cold.

Check the minimum fuel standard applicable temperature.

The temperature of wood carving machine is not very big, but because the user USES butter screw, winter also forgot to clean, cause every time starting up did not get off, some of the studio temperature is too low, add oil, can or freeze on the machine did not run.

5. The cooling water

Have the condition to prevent freezing to cool down.

Pay attention to the ambient temperature because the water temperature is too cold and the water tanks and pipes freeze and crack. If the cooling water is too dirty the motor can be caused by a serious injury to ensure that the cooling water and the pump are clean and working properly.

Carved object is to choose the right technology to use reasonable, carved from the process in principle is the combination of a drilling and milling processing. Can be a high return on investment projects. CNC engraving object is characterized by complex patterns, strange shapes, fine scrap wood engraving machine light structure, which is actually limited to the work of the CNC Engraving: a small tool, milling "In fact, this is also reason of the professional advantages of CNC engraving CNC engraving is a dry business practice tool can not be processed CNC carved a unique professional edge

Engraving machine tool use knowledge introduction

1, in the choice of woodworking engraving machine  tool on the issue, the operator must know that the small power motor should choose a small handle knife, knife speed slow down, high power can choose a large tool handle tool! Speed can be put up.

2, carving materials are different, then choose the engraving tool is certainly different. Uncompromising need of small angle, tip of the small tool. Large text patterns do not affect the accuracy of the case as far as possible to choose a large angle and big tip. To improve the machine's largest processing efficiency, carving hardness of the material, the tool angle should be large.

3, wood engraving machine carving knife frequent broken knife in addition to the quality of the tool has a relationship, but also with your carving set, a large proportion of said that with the Jinan carving machine manufacturers also have a great relationship between the quality of the machine.