Views: 3 Author: Site Editor Publish Time: 2022-05-05 Origin: Site
A metal pipe laser cutting machine basically uses a laser beam to cut through different types of metal (brass, aluminum, copper, gold, silver) as well as glass, wood, acrylic and turn them into 2D or 3D structures. These machines are helpful in plenty of industries such a automobile industry, electronics industry, signage, architecture and so forth.
Laser cutting is a sheet metal processing that laser beam radars on the processing material. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser beam can be divided into solid state and un-solid state verse to fiber laser and Co2 laser. Fiber Laser’s wavelength is 1.06μm, 1/10 compare with CO2 Laser, more easy to be absorbed by metal materials, not only higher cutting speed with cutting MS、SUS and SUS, also has fiber Laser’s wavelength is 1.06μm, 1/10 compared to CO2 Laser.
SHUT DOWN SEQUENCE OF 1KW FIBER LASER CUTTING MACHINE
1. Turn off the exhaust fan or dust collector;
2. Turn off the high voltage of the fiber laser, return the machine to the original point, and then turn off the control system as required. After the control system is turned off, press the power off button to turn off the power of the control system and turn off the main power switch of the machine;
3. Turn off the water cooler;
4. Turn off the chiller and dryer, and turn off the control valves of each gas path;
5. Turn off the air compressor;
6. Turn off the key switch of the fiber laser, and then turn off the power switch or leave the key switch and power switch on to keep the fiber laser charged. It can be used quickly the next day;
7. Turn off the voltage regulator;
8. Turn off the power switch of each branch and the main power switch of the fiber laser cutting machine. Warm tips: please switch on and off in strict accordance with the order, which can effectively reduce the risk of internal condensation of fiber laser, so as to reduce the failure of fiber laser.
Security and non-pollution
With a completely enclosed design;The observation window is made of laser-protective glass that meets European CE standards.
Without Manual Focusing, Autofocus Laser Cutting Head
The software automatically adjusts the focusing lens to achieve automatic perforating and cutting of various thickness plates. The speed of automatically adjusting the focus lens is ten times faster than manual adjustment.
Fiber Lasers Source
Raycus Multi-module CW Fiber Lasers range in power from 1,000W to 6000W and feature high electro-optical conversion efficiency, high light beam quality, high energy density, wide modulation frequency, high reliability, long service life, maintenance-free operation.
Laser Cutting Machine Welded Bed
The high strength machine bed is treated with a stress relief annealing method at 600°C, which results in a strong structure rigidity; integral mechanical structures have the advantages of small deformation, low vibration, and extremely high precision.
Servo and Motor
JAPAN Fuji servo high speed srvo motor
Effectively reduce beam speed, make cutting and machine more stable, and extend machine life.
Advantages of metal pipe laser cutting machine :
The lightning rapid perforation process reduces perforation time by 90%.
The perfect combination of lightning rapid perforation process and BodorGenius ensures the laser head complete the whole perforation process during its moving fall..
No additional action and time to be taken when cutting sheets with medium thickness.